MuteMat® USP 650 – 03 | Under Screed Soundproofing
Shipped by iKoustic from the UK
£14.96
£41.94 inc. VAT
Floor Soundproofing
MuteMat USP 650-03
Take a look at the system’s features and benefits.
23 dB ΔLw Impact Reduction*
Noises like footsteps on wood flooring and washing machines.
3 mm additional System Height
The height added to your floor after the system is installed.
We stand for quality, and we are proud of it.
MuteMat™ USP 650-03 is our thin and high-performing acoustic under-screed resilient layer for reducing impact noise between the floating concrete screed and structural concrete slab layers – as a dense and robust product it maintains a low level of compressibility, so even when it is subjected to high points loads – it maintains it’s acoustic performance, thus making it suitable for residential and commercial use without increasing floor heights drastically
MuteMat® USF 650-03 is our highly effective acoustic under screed for soundproofing concrete flooring between the structural concrete slab and floating screed. Its high recycled content helps to reduce the carbon footprint while still retaining a consistent density, this assures that our material’s acoustic performance and its longevity is upheld without fluctuation or fault.
Advice and installation
Our team are always a phone call away ready to offer advice and support. Our systems can be installed by competent DIYers but if you would like to work with an installer we have relationships with installers up and down the UK that we can put you in touch with.
- Easy to install, roll out and tape joins
- Raises the floor by 3mm
- A moisture-resistant sheeting may be required during installation
- 23dB* for impact
- Compliant with both Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland) and Building Standards Technical Handbook 2017 for Scotland for impact transmission.
Frequently
Asked
Questions
A soundproofing system isn’t rocket science but sometimes figuring out which one is right for you can be challenging. Check out our FAQs, get in touch via our live chat, or give us a call to speak to a human.
Find out more information about MuteMat® USP 650 – 03 by downloading the guides below.
If you are looking to specify this product for a build, please refer to our downloads tab for technical product or systems information.
Technical Support
Should you require further technical assistance in specifying our products, please contact us.
BIM Objects
iKoustic also supply a selection of BIM objects via our NBS profile, which can be found here.
Important Information
Our products contain a high level of mass. If there are any structural concerns you will want to consult a Structural Engineer to discuss your requirements.
*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this, you can view their variants on our ‘Featured Systems’ tab.
