MuteClip® Single Premium – Brick Wall Soundproofing
Wall Soundproofing
MuteClip® Single Premium
Take a look at the system’s features and benefits.
MuteClip® System
Our MuteClip® Systems reduce the most noise in the smallest footprint.
59mm System Width
The width added to your wall after the application.
NOISE REDUCTION
Hear the difference.
Play the video to hear the sound difference before and after installing this system. For best results try to match the volume of the unreduced audio to the volume of the noise you’re able to hear.
The noise in the video has been digitally reduced to give you an idea of the sorts of results you could expect. Unfortunately, this is not a perfect science and your personal results could vary due to myriad reasons. However, we have found our customers prefer to hear a decibel reduction rather than read it!
We stand for quality, and we are proud of it.
MuteClip® Single Premium is our slim option for projects that require a wall soundproofing solution that performs at a high standard and is space-conscious, with only a 59mm loss of space. It creates fewer points of contact with the partition wall using our MuteClip®, which is composed of a dual-density rubber in a galvanised metal case, acting as a mini shock absorber.
The MuteClip® Channel affixes to the MuteClip® and the new soundproof wall which is composed of a layer of our MuteBoard® 2 suspends away from the partition wall, ultimately resulting in a vastly improved reduction of airborne noise, especially in the more problematic lower to middle-lower frequencies, as well as reducing immediate vibrations.
How to soundproof a brick wall
Brick walls already have quite good soundproof qualities so to improve that we need to employ some science and engineering magic. Instead of solely adding mass the MuteClip® Double stud creates two structures decoupled from the original brick wall.
First, a Stud frame is built and only connected to the flanking walls, floor and ceiling not the problem wall. This helps prevent the original wall from transferring noise vibrations to our new wall.
The stud wall is then filled with sound-absorbing acoustic mineral wool. We then attach our sound isolation clips (MuteClip®) to the joists of the stud frame these act as mini shock absorbers to further reduce the noise vibrations. From here you can clip our MuteClip® Channels into the MuteClips® the create a frame to which you can attach two layers of acoustic plasterboard. Between these two layers, we install sound-dampening Tecsound. Once complete this creates an incredible reduction in decibels.
Soundproofing a brick party wall
Unfortunately, we frequently encounter customers who are at their wits’ end because of noisy neighbours. This obtrusive noise may stress a person out or just make them uncomfortable. A MuteClip® System can lower this noise to a level that you can forget about when it comes to soundproofing your walls against noisy neighbours!
IKoustic will be ready to provide all the assistance you need to create the system that works for you once you’re ready to put an end to disruptive noise and soundproof your walls against noisy neighbours.
Advice and installation
Our team are always a phone call away ready to offer advice and support. Our systems can be installed by competent DIYers but if you would like to work with an installer we have relationships with installers up and down the UK that we can out you in touch with.
MuteClip® Single Premium Calculator
Use our handy calculator to see what soundproofing products your project will require. Don’t forget to unfold the ‘more info’ tab below to learn how to use this calculator.
Once you have your calculator results you can add all the products to your basket using the button below. You will have to manually input the results from the calculator. We know this is not ideal and we are looking into developing a solution for this.
Wall Stud Center
The wall stud center is the distance between stud uprights. The typical stud upright is 600mm. If you are working directly on a brick wall we recommend using a 600mm spacing here also.
Wall Channel Center
The wall channel center is the distance between the horizontal MuteClip Channels. The typical channel center is 600mm. If you are working directly on a brick wall we recommend using a 600mm spacing here also.
- If you have multiple adjacent surfaces or partitions to soundproof input them individually. Not as a total m2 input as this will affect the results.
- If you have windows, fireplaces or other fixed structures we recommend booking a call with us before purchasing.
- This calculator is designed to give a quick estimate. If you require an accurate quotation please call our team.
Frequently
Asked
Questions
A soundproofing system isn’t rocket science but sometimes figuring out which one is right for you can be challenging. Check out our FAQs, get in touch via our live chat, or give us a call to speak to a human.
downloads
If you need product data or installation guides for this system you’ll always find them here.
If you are looking to specify this product for a build, please refer to our downloads tab for technical product or systems information.
Technical Support
Should you require further technical assistance in specifying our products, please contact us.
BIM Objects
iKoustic also supply a selection of BIM objects via our NBS profile, which can be found here.
Our products contain a high level of mass. If there are any structural concerns you will want to consult a Structural Engineer to discuss your requirements.
*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this, you can view their variants on our ‘Featured Systems’ tab.
Be the first to review “MuteClip® Single Premium – Brick Wall Soundproofing”
You must be logged in to post a review.
Reviews
There are no reviews yet.