STS TG4 Acoustic Flooring Board 22mm
Shipped by iKoustic from the UK
£39.95
£47.94 inc. VAT
-
- Performance: 34dB.*
- Dimensions: 1200mm x 600mm x 22mm
- Weight: 24.8kg
- Mass: 34.4 kg/m²
- For: Homes and commercial installations.
- Compliance: Compliant with Part E Building Regulations (England, Wales, Northern Ireland and the Republic of Ireland).*
- Installation: See our install section below.
- Where: Structural flooring replacement where additional mass is needed for airborne sound reduction.
A load-bearing, cement particle acoustic flooring board for the improvement of airborne noise in flooring systems.
STS TG4 Acoustic Flooring Board 22mm
A load-bearing acoustic flooring board at over double the density of standard P5 chipboards to improve the airborne sound reductions transferring through a floor. Commonly installed on top of our P8 isolation strip a floating floor system can be created. Floating floor systems are some of the highest performing systems for reduction of sound and vibration through floor/ ceiling partitions and when using the STS TG4 acoustic flooring board in place of conventional structural boarding minimal height is added on to the floor build up. The TG4 acoustic flooring board can be installed on timber joist or metal structures with tongue and groove on four sides to give an airtight seal.
As fibre cement is water resistant, this means the board can also be used in a wide range of applications including: wet rooms, kitchens, outdoor tiled areas, flat rooms, balconies, garden rooms and many more.
The high thermal conductivity of the cement fibre board allows the cement fibre to absorb and release heat much more efficiently than chipboard, therefore enhancing the performance of you underfloor heating.
Further reductions in both impact and airborne sound transmission can be gained by using a suitable MuteMat underlay on top of the STS TG4 boards. The performance can even be further increased with the addition of Tecsound, which will help to further reduce sound and vibration for areas requiring higher levels of performance.
STS TG4 Acoustic Flooring Board Coverage Calculator
Water Resistant acoustic flooring board
Ideal for use in bathrooms and areas that may get wet. STS construction board will not rot or delaminate under damp conditions.
Fire resistant construction board
STS construction board has a Euroclass A1 fire rating.
Prevents Flex
Some Soundproof underlays like MuteMat 3 have foam that can be compressed as this helps prevent impact noise. With tiles and LVT this compression can cause issues. Construction board prevents this and adds acoustic protection.
acoustic flooring board UK shipping
Our construction board is shipped on a pallet. Unlike others, we hold stock of all of our products ready to dispatch same day Monday to Friday. We also offer next day delivery for orders placed before 1pm Monday to Friday.
High thermal conductivity
STS TG4 acoustic flooring board has a the ability to absorb and release heat much more efficiently than chipboard, therefore enhancing the performance of you underfloor heating.
Find out more information about STS TG4 Acoustic Flooring Board 22mm by downloading the guides below.
If you are looking to specify this product for a build, please refer to our downloads tab for technical product or systems information.
Technical Support
Should you require further technical assistance in specifying our products, please contact us.
BIM Objects
iKoustic also supply a selection of BIM objects via our NBS profile, which can be found here.
Important Information
Our products contain a high level of mass. If there are any structural concerns you will want to consult a Structural Engineer to discuss your requirements.
*Our Typical Performance Results and Noise Reduction Guidance are provided to indicate the results that have been achieved in previous tests but are not guaranteed to a specific site as multiple factors can affect this, you can view their variants on our ‘Featured Systems’ tab.
